Opel Corsa Owners Manual: Stop watch, Vehicle personalisation

Stop watch

Stop watch
Stop watch

Select menu item Stop Watch from the Board Computer menu.

To start, select menu item Start. To stop, select menu item Stop.

To reset, select menu item Reset.

The relevant stop watch display can be selected in the Options menu: Driving Time excl. Stops The time the vehicle is in motion is recorded. Stationary time is not included.

Driving Time incl. Stops

The time the vehicle is in motion is recorded. The time the vehicle is stationary with the ignition switched on is included.

Travel Time

Measurement of the time from manual activation via Start to manual deactivation via Reset.

Vehicle personalisation

The vehicle-specific functions P1 to P7 can be activated and deactivated.

The setting selected is automatically stored depending on the vehicle key used.

Different settings are stored for each vehicle key. Use of a specific vehicle key will activate the settings associated with it.

A total of up to five vehicle keys can be programmed separately.

Programming permits the technical prerequisite of the relevant function.

To activate and deactivate the functions and set the functions, please see the relevant sections.

Programming

■ Turn the ignition off, the key must be in the ignition switch.

■ Pull turn signal lever and wiper


■ Pull turn signal lever and wiper lever simultaneously to the steering wheel until you hear a confirmation signal (approx. 3 seconds).

■ The odometer display shows P1.

■ Push the turn signal lever (left) up


■ Push the turn signal lever (left) up or down and select the desired function P1 - P7.

■ Push the wiper lever (right) up or


■ Push the wiper lever (right) up or down and select status On or OFF, or input a value for speed (P6) or value for volume (P7).

■ Pull turn signal lever (left) and wiper lever (right) simultaneously to the steering wheel until you hear a confirmation signal (approx.

3 seconds).

The selected settings are now stored for the key in the ignition switch. To activate and deactivate the functions and set the functions selected, please see the relevant sections.

Repeat the procedure to programme additional keys.

Programmable functions

P1: Switch on the external lighting using the remote control. Exit lighting.

P2: Automatic rear windscreen wiper when reverse gear is selected. Rear window wiper/washer.

P3: Lane change indication: three flashes when the lever is moved slightly. Turn and lane-change signals.

P4: Automatic locking.

P5: Selective unlocking.

P6: Speed warning.

P7: Volume of the acoustic turn signal.

    Trip computer in Graphic-Info-Display or Color-Info-Display
    The main page of the trip computer provides information on range, instantaneous consumption and average consumption of BC 1. To display other trip computer data, press the BC button on the Infot ...

    Lighting
    ...

    See also:

    Opel Corsa B 1993–2000 Service and Repair Manual. Camshafts - removal and refitting
    Removal 1. Remove the camshaft toothed belt as described in Section 7. 2. Remove the spark plug cover, which is retained by two Allen screws. Disconnect the breather hoses from the camshaft cover ...


    0.0124