Opel Corsa B 1993–2000 Service and Repair Manual: Contact breaker ignition system
Opel Corsa B 1993–2000 Service and Repair Manual / Contact breaker ignition system
Specifications
General
Distributor
Ignition coil
Torque wrench settings
Oil pressure warning light switch/gauge sender - removal and refitting
Removal 1. The switch/gauge sender is screwed into the cylinder block or oil filter carrier (depending on model). 2. Disconnect the battery negative lead and disconnect the wiring from the switch ...General information
1. In order that the engine can run correctly it is necessary for an electrical spark to ignite the fuel/air mixture in the combustion chamber at exactly the right moment in relation to engine spe ...See also:
Opel Corsa B 1993–2000 Service and Repair Manual. Cylinder head and pistons
- decarbonising
1. This can be carried out with the engine
either in or out of the car. With the cylinder
head removed, carefully use a wire brush and
blunt scraper to clean all traces of carbon
deposits from the ...