Opel Corsa B 1993–2000 Service and Repair Manual: OHV engine
Opel Corsa B 1993–2000 Service and Repair Manual / OHV engine
Specifications
General
Valve clearances (warm)
Cylinder head
Valves and guides
Camshaft
Pistons and bores
Piston rings
Gudgeon pins
Crankshaft and bearings
Flywheel
Lubrication system
Torque wrench settings
Every 36 000 miles
Automatic transmission fluid
renewal
1. Allow the transmission to cool down before
draining, as the fluid: can be very hot indeed.
2. Remove all the fluid pan screws except one
which should be un ...
General description
The engine is of four-cylinder. in-line
overhead valve type, mounted transversely at
the front of the car.
The crankshaft is supported in three shell
type main bearings. Thrustwashers are
incor ...
See also:
Opel Corsa B 1993–2000 Service and Repair Manual. Cooling system hoses -
disconnection and renewal
1. If the checks reveal
a faulty hose, it must be renewed as follows.
2. First drain the cooling system. If the coolant is not due for
renewal, it may be re-used if it is collected in a
clean cont ...
