Opel Corsa B 1993–2000 Service and Repair Manual: Contact breaker ignition system
Opel Corsa B 1993–2000 Service and Repair Manual / Contact breaker ignition system
Specifications
General
Distributor
Ignition coil
Torque wrench settings
Oil pressure warning light
switch/gauge sender -
removal and refitting
Removal
1. The switch/gauge sender is screwed into
the cylinder block or oil filter carrier
(depending on model).
2. Disconnect the battery negative lead and
disconnect the wiring from the switch ...
General information
1. In order that the engine can run correctly it
is necessary for an electrical spark to ignite
the fuel/air mixture in the combustion
chamber at exactly the right moment in
relation to engine spe ...
See also:
Opel Corsa B 1993–2000 Service and Repair Manual. Camshaft toothed belt -
removal and refitting
Note: The camshaft toothed belt must be
renewed every time it is removed, even if it is
apparently in good condition.
Removal
1. Raise and support the front of the vehicle. Remove
the engine unde ...
