Opel Corsa B 1993–2000 Service and Repair Manual: Bodywork and fittings
Opel Corsa B 1993–2000 Service and Repair Manual / Bodywork and fittings
Specifications
Torque wrench settings
Torque wrench settings | Nm | lbf ft |
Bonnet hinges | 20 | 15 |
Tailgate hinges | 20 | 15 |
Tailgate lock striker | 20 | 15 |
Front and rear trim panel nuts | 12 | 9 |
Tailgate strut attachments | 20 | 15 |
Seat belt mountings | 35 | 25 |
Rear crossmember-to- lock bolts | 55 | 43 |
Rear body panel-to-lock bolts | 20 | 15 |
Front seat mountings | 20 | 15 |
Front seat back-to-frame bolts | 30 | 22 |
Wheel alignment and steering
angles - general information
Accurate front wheel alignment is essential
for precise steering and handling, and for
even tyre wear. Before carrying out any
checking or adjusting operations, make sure
that the tyres are correc ...
General information
The main body structure is a welded
construction of individually shaped panels
which make up a 'monocoque' bodyshell,
without a separate chassis. Various areas are
strengthened to provide for susp ...
See also:
Opel Corsa B 1993–2000 Service and Repair Manual. Cylinder head - removal and
refitting
Removal
1. Make sure that the engine is cold before
commencing operations to avoid any chance
of the head distorting.
2. Disconnect the battery negative terminal
3. Drain the cooling system, an ...