Opel Corsa B 1993–2000 Service and Repair Manual: Front seat - removal and refitting


1. Remove the trim which covers the seat outboard rail. This trim is secured by a single self-tapping screw at the front (see illustration).

Bodywork and fittings
Seat rail trim removal

2. Remove the four bolts which secure the seat rails to the floor (see illustrations). Remove the seat, complete with rails; disconnecting the seat heating wires (when fitted).

Bodywork and fittings
Seat rail front retaining bolt (one of two)

Bodywork and fittings
Seat rail rear retaining bolt (one of two)

3. The seat can be separated from the rails if wished, for example if attention to the adjustment mechanisms is necessary.


4. Refit in the reverse order to removal, but observe the following tightening sequence for the rail bolts:

  1. Nip up the rear bolts.
  2. Tighten the front bolts to the specified torque.
  3. Tighten the outboard rear bolt to the specified torque.
  4. Tighten the inboard rear bolt to the specified torque and refit the seat rail trim.
    Exterior rear view mirror components - removal and refitting
    Mirror glass 1. On all types, the mirror glass may be renewed separately. 2. Prise out the old glass (if intact) with a wooden wedge, and when applicable disconnect the electrical cables. Engage ...

    Head restraints - removal and refitting
    Removal 1. Both front and rear head restraints are removed in the same way. 2. Pull the head restraint up as far as it will go. 3. Release the catch spring by pushing it rearwards and remove the ...

    See also:

    Opel Corsa Owners Manual. Fuel consumption - CO2-Emissions
    The determination of fuel consumption is regulated by European directive 80/1268/EEC (latest edition 2004/3/EC). The directive is oriented to actual driving practices: Urban driving is rated at ...