Opel Corsa B 1993–2000 Service and Repair Manual: Bodywork and fittings
Opel Corsa B 1993–2000 Service and Repair Manual / Bodywork and fittings
Specifications
Torque wrench settings
| Torque wrench settings | Nm | lbf ft |
| Bonnet hinges | 20 | 15 |
| Tailgate hinges | 20 | 15 |
| Tailgate lock striker | 20 | 15 |
| Front and rear trim panel nuts | 12 | 9 |
| Tailgate strut attachments | 20 | 15 |
| Seat belt mountings | 35 | 25 |
| Rear crossmember-to- lock bolts | 55 | 43 |
| Rear body panel-to-lock bolts | 20 | 15 |
| Front seat mountings | 20 | 15 |
| Front seat back-to-frame bolts | 30 | 22 |
Wheel alignment and steering
angles - general information
Accurate front wheel alignment is essential
for precise steering and handling, and for
even tyre wear. Before carrying out any
checking or adjusting operations, make sure
that the tyres are correc ...
General information
The main body structure is a welded
construction of individually shaped panels
which make up a 'monocoque' bodyshell,
without a separate chassis. Various areas are
strengthened to provide for susp ...
See also:
Opel Corsa B 1993–2000 Service and Repair Manual. Pistons and connecting rods
- removal and refitting
Removal
1. Remove the cylinder head, the sump and
the oil pump, as described in earlier Sections.
2. The connecting rod big-end caps and rods
may not be marked numerically for location
when new a ...