Opel Corsa B 1993–2000 Service and Repair Manual: MOT Test Checks

This is a guide to getting your vehicle through the MOT test.

Obviously it will not be possible to examine the vehicle to the same standard as the professional MOT tester. However, working through the following checks will enable you to identify any problem areas before submitting the vehicle for the test.

Where a testable component is in borderline condition, the tester has discretion in deciding whether to pass or fail it. The basis of such discretion is whether the tester would be happy for a close relative or friend to use the vehicle with the component in that condition. If the vehicle presented is clean and evidently well cared for, the tester may be more inclined to pass a borderline component than if the vehicle is scruffy and apparently neglected.

It has only been possible to summarise the test requirements here, based on the regulations in force at the time of printing. Test standards are becoming increasingly stringent, although there are some exemptions for older vehicles. For full details obtain a copy of the Haynes publication Pass the MOT! (available from stockists of Haynes manuals).

An assistant will be needed to help carry out some of these checks.

The checks have been sub-divided into four categories, as follows:

Buying tools
For practically all tools, a tool factor is the best source, since he will have a very comprehensive range compared with the average garage or accessory shop. Having said that, accessory shops oft ...

Checks carried out from the driver's seat
Handbrake Test the operation of the handbrake. Excessive travel (too many clicks) indicates incorrect brake or cable adjustment. Check that the handbrake cannot be released by tapping the ...

See also:

Opel Corsa B 1993–2000 Service and Repair Manual. Rear trim panel - removal and refitting
Removal 1.Remove the number plate lamps. 2.Inside the car, free the soft trim from the rear panel to expose the two securing nuts (see illustration). Remove the nuts. Rear trim panel securing ...


0.0086