Opel Corsa B 1993–2000 Service and Repair Manual: OHV engine
Opel Corsa B 1993–2000 Service and Repair Manual / OHV engine
Specifications
General
Valve clearances (warm)
Cylinder head
Valves and guides
Camshaft
Pistons and bores
Piston rings
Gudgeon pins
Crankshaft and bearings
Flywheel
Lubrication system
Torque wrench settings
Every 36 000 miles
Automatic transmission fluid
renewal
1. Allow the transmission to cool down before
draining, as the fluid: can be very hot indeed.
2. Remove all the fluid pan screws except one
which should be un ...
General description
The engine is of four-cylinder. in-line
overhead valve type, mounted transversely at
the front of the car.
The crankshaft is supported in three shell
type main bearings. Thrustwashers are
incor ...
See also:
Opel Corsa B 1993–2000 Service and Repair Manual. Front suspension strut -
removal and refitting
Removal
1. Slacken the front wheel bolts, raise and
support the vehicle and remove the front wheel.
2. Remove the split pin and undo the
driveshaft retaining nut. Remove the nut and washer.
3. Un ...
